Stoma Stifler | What’s in the box | Fitting: Method “A” Method “B” | Purchase | Contact
Use this method if you currently do not use an ostomy belt (1B).
Apply two 2”x4” strips of tape to the anchor plate, overlapping approximately 1” of the plate (4B & 5B).
Attached the long Snug Band to the cup (6B). Snap the cup to the anchor plate (7B), and then center the cup on your pouch, over your stoma (8B).
Press down the tape around the anchor plate. Remove the cup by squeezing the sides (12B), and continue pressing down firmly on the tape, working your way completely around the perimeter of the anchor plate (9B).
Attach the Stoma Stifler to the plate, the magnetic clasp will engage with an audible “click” (10B). Cinch the Snug Band around your waist and hook the slider-clip onto the band as shown (11B). The slider-clip location is adjustable: loosen the band from the slider-clip, then slide the clip to make the Snug Band more snug or less snug, as needed.
To easily and quickly remove Stoma Stifler from the anchor plate, unhook the Snug Band, then pinch the sides at the red arrows shown (12B), and the cup will release.
